Is there a way to hide the player Next button until a learner clicks all the objects on a screen? I was trying to change it's state to hidden until a variable was adjusted, but I can't find a way to do that.
Michelle - You can really hide and unhide it using a trigger, but you can just add a condition to the Next button trigger that disables it.
Create a True/False variable that adjusts to true when the user clicks whatever should be clicked.
Double click the trigger in Trigger pane that says "Jump to next slide when user clicks the Next button."
In the trigger dialog that opens, click "Show conditions"
Below the large "On Condition" box, click the green plus sign in the lower right corner.
Then in the condition dialog apply the following settings List: Variables If: (select the variable that should be adjusted) Operator: == Equal to Type: Value Value: True
It looks like Robert has you covered here, but I also wanted to share a link to a support article that walks you through the steps as well on how to set this up. If you really need the "next" button to not be visible to the user until they've interacted with all elements, you'd need to add it as a custom button on the slide itself as the player buttons or functions can't be controlled by trigger.
Just an added note to the support article Ashley mentioned. In order to make sure the slide did not automatically advance after the video (or whatever you set it to) was done I had to:
1) View my slides in "Story View"
2) Select the slide. Had to select each slide individually :( (If anyone knows how to do this in bulk let me know).
3) Under "Slide Properties" change the Slide advances pull-down menu to "By user"
After setting that the slide only advanced if the viewer clicked the Next button, after the video is complete, as shown in the support article.
If you select more than one slide in Story view by using the CTRL button as you click on them, you'll see the slide properties set up changes to allow you to adjust for multiple slides.
Either a new variable for each slide, or reset it at the start of the timeline for each slide - which method you choose depends on if/how you'd want them to experience the slides on a revisit.
Also, just as an FYI replying via email includes your signature here so you're welcome to edit the post to remove that information if you'd like.
Best practice is to disable the Next button, not hide it altogether. Some learners panic when there isn't a Next button visible. Besides, a disabled Next provides more of a visual cue to the learner than a non-existent Next button.
The link still works for me (in my last post with a hyperlink) so I'm not sure what you're experiencing but I copied the info here below:
You can prevent users from advancing too quickly through a Storyline slide, using either of the following methods:
Disable the built-in Next button until they've met certain conditions, such as clicking all the buttons on the slide or listening to all the narration.
Remove the built-in Next button and create your own custom button for navigation.
We'll look at each of these options below. (If you need to restrict navigation throughout an entire course, take a look at this article.)
Temporarily disable the built-in Next button
Create a new True/False variable, and set its initial value to False. For example:
Then add a new trigger to the slide that adjusts the value of the variable to True when a specific event has occurred. Here are a few examples:Lastly, edit the "next slide" player trigger to add a condition, so that the Next button will only work if your True/False variable is True. The condition would look something like this:
If you want users to interact with all the hotspots on a slide before advancing, take a look at this article.
If you have several buttons on the slide and you want users to click all of them before continuing, set the trigger to execute when the states of all the buttons are Visited:
If you want users to listen to all the audio or view an entire video before continuing, set the trigger to execute when Media completes:
If your slide doesn't include audio but you want users to wait until the slide's timeline has completed, set the trigger to execute when Timeline ends:
No problem Karen - and just an FYI replying via email includes your signature here, and you're welcome to edit your post and remove it if you would like.
So can someone confirm there is NO way to hide the built in Next button in Storyline 2 AND code a way for it to appear? You must uncheck the Next button in the options?
With that being said, I agree with Bob's statement earlier about it being a better practice to disable the Next button, rather than hide it completely. More user friendly in my opinion.
Is the Next button failing to disable or is it failing to become normal? I've worked a lot with variables since creating this initial post. What I do, is this:
Change State of Next button to Disabled When timeline (of current slide) starts Condition: Flag1=False OR Flag2=False OR Flag3=False. (make sure you use OR, not AND)
When user clicks button1 Show layer (or lightbox or whatever you want to happen) Set Flag1 to True Change State of Next button to Normal Condition: Flag1=True AND Flag2=True AND Flag3=True (make sure you use AND, not OR)
When user clicks button2 Show layer (or lightbox or whatever you want to happen) Set Flag2 to True Change State of Next button to Normal Condition: Flag1=True AND Flag2=True AND Flag3=True (make sure you use AND, not OR)
When user clicks button3 Set Flag3 to True (or lightbox or whatever you want to happen) Change State of Next button to Normal Condition: Flag1=True AND Flag2=True AND Flag3=True (make sure you use AND, not OR)
The Next button simply won't work. I've clicked all the hotspots which open individual lightbox slides, then the Next button and it doesn't progress to the next designated slide. I even tried selecting only 1 hotspot at a time then the Next button and it still didn't work. I've created a hover state of the Next button which does work as expected though.
I have added further hotspots on the lightbox slides, but I don't see how these would effect the Next button?
While you're troubleshooting this issue you may consider adding some variable references to your slide so that you can confirm your triggers are properly changing your lightbox variables to "True".
This can be especially helpful when troubleshooting and many times helps me identify which trigger isn't working, which then hopefully leads to figuring out why it's not working...
Again, if you can post a .story file that has this same issue we can help troubleshoot.
If you are checking 6 different hotspots, you need some kind of action to set the Next button to Normal. Just setting the variables to True won't do it. You need an action for CHANGE STATE OF to work. So, you need to check all 6 variables for TRUE Each time you click the hotspot, since you might click them in a different order... I just say CHANGE STATE OF Next button to Normal on the condition that variable 1 2 3 4 5 and 6 are True. Before that you need to set the variable to true right beforehand. You need to do this on each button/hotspot.
You might want to try rearranging the order of your triggers. If you check for True, THEN set variable, then it will not work.
Thank you all for replying, however after spending even more time on it I still can't get it to work.
I've added your suggestion of variables references Brian, and it turns out that the hotspots weren't changing to True once they were clicked for some reason. So I changed the trigger to 'mouse hovered over' instead of 'user clicks', and now they do change as expected.
I've also added your trigger suggestions Mary Ann, and re-ordered all the triggers to what I think is right, but I like I say it's still not working.
The button disables as expected but won't change back to normal. I think it might have something to do with the 'Change State Back to Normal' trigger, as I'm not sure what to set the 'When' to?
27 Replies
Michelle - You can really hide and unhide it using a trigger, but you can just add a condition to the Next button trigger that disables it.
List: Variables
If: (select the variable that should be adjusted)
Operator: == Equal to
Type: Value
Value: True
Hi Michelle,
It looks like Robert has you covered here, but I also wanted to share a link to a support article that walks you through the steps as well on how to set this up. If you really need the "next" button to not be visible to the user until they've interacted with all elements, you'd need to add it as a custom button on the slide itself as the player buttons or functions can't be controlled by trigger.
Just an added note to the support article Ashley mentioned. In order to make sure the slide did not automatically advance after the video (or whatever you set it to) was done I had to:
1) View my slides in "Story View"
2) Select the slide. Had to select each slide individually :( (If anyone knows how to do this in bulk let me know).
3) Under "Slide Properties" change the Slide advances pull-down menu to "By user"
After setting that the slide only advanced if the viewer clicked the Next button, after the video is complete, as shown in the support article.
Hi TS,
If you select more than one slide in Story view by using the CTRL button as you click on them, you'll see the slide properties set up changes to allow you to adjust for multiple slides.
Do you need to create a new "Slide Complete" variable for every slide? I can get one slide to work but not the rest of them.
Hi TS,
Either a new variable for each slide, or reset it at the start of the timeline for each slide - which method you choose depends on if/how you'd want them to experience the slides on a revisit.
Also, just as an FYI replying via email includes your signature here so you're welcome to edit the post to remove that information if you'd like.
Best practice is to disable the Next button, not hide it altogether. Some learners panic when there isn't a Next button visible. Besides, a disabled Next provides more of a visual cue to the learner than a non-existent Next button.
The link to the support article now leads to a blank page. Searching did not find it for me. Can you supply a correct link?
Hi Karen,
The link still works for me (in my last post with a hyperlink) so I'm not sure what you're experiencing but I copied the info here below:
You can prevent users from advancing too quickly through a Storyline slide, using either of the following methods:
We'll look at each of these options below. (If you need to restrict navigation throughout an entire course, take a look at this article.)
Temporarily disable the built-in Next button
Thank you, I'll give that a try.
No problem Karen - and just an FYI replying via email includes your signature here, and you're welcome to edit your post and remove it if you would like.
So can someone confirm there is NO way to hide the built in Next button in Storyline 2 AND code a way for it to appear? You must uncheck the Next button in the options?
It's definitely possible to hide the next button and code it to appear. You can test this very simply by:
With that being said, I agree with Bob's statement earlier about it being a better practice to disable the Next button, rather than hide it completely. More user friendly in my opinion.
Ok I will try that. Thank you so much! I do agree, after thinking about
it, that it is better to disable it. Thank you both for replying!
Glad that Brian was able to pop in and assist you here Mary Ann :)
Hi
I've followed the below video on how to disable the Next button until all the hotspots on the slide have been clicked, but it still won't work for me:
https://en-uk.articulate.com/support/storyline/how-to-disable-the-next-button-until-users-have-interacted-with-all-hotspots
I've attached a snippet of all the triggers I've created.
Can anyone tell me where I'm going wrong? Any help will be much appreciated.
Thanks,
Stephanie
Hi Stephanie, Happy New Year.
Can you tell us exactly what isn't working, or possibly post your .story file here? I agree with you that your trigger set up looks solid...
Is the Next button failing to disable or is it failing to become normal? I've worked a lot with variables since creating this initial post. What I do, is this:
Change State of Next button to Disabled
When timeline (of current slide) starts
Condition: Flag1=False OR Flag2=False OR Flag3=False. (make sure you use OR, not AND)
When user clicks button1
Show layer (or lightbox or whatever you want to happen)
Set Flag1 to True
Change State of Next button to Normal
Condition: Flag1=True AND Flag2=True AND Flag3=True (make sure you use AND, not OR)
When user clicks button2
Show layer (or lightbox or whatever you want to happen)
Set Flag2 to True
Change State of Next button to Normal
Condition: Flag1=True AND Flag2=True AND Flag3=True (make sure you use AND, not OR)
When user clicks button3
Set Flag3 to True (or lightbox or whatever you want to happen)
Change State of Next button to Normal
Condition: Flag1=True AND Flag2=True AND Flag3=True (make sure you use AND, not OR)
Hi Brian
Happy New Year!
The Next button simply won't work. I've clicked all the hotspots which open individual lightbox slides, then the Next button and it doesn't progress to the next designated slide. I even tried selecting only 1 hotspot at a time then the Next button and it still didn't work. I've created a hover state of the Next button which does work as expected though.
I have added further hotspots on the lightbox slides, but I don't see how these would effect the Next button?
Thanks,
Stephanie
While you're troubleshooting this issue you may consider adding some variable references to your slide so that you can confirm your triggers are properly changing your lightbox variables to "True".
Here's a link explaining how to display variable references if you're not already familiar with it - https://community.articulate.com/series/articulate-storyline-2/articles/adding-variable-references
This can be especially helpful when troubleshooting and many times helps me identify which trigger isn't working, which then hopefully leads to figuring out why it's not working...
Again, if you can post a .story file that has this same issue we can help troubleshoot.
Good luck!
Can you share your .story file here so that we can have a closer look?
If you are checking 6 different hotspots, you need some kind of action to set the Next button to Normal. Just setting the variables to True won't do it. You need an action for CHANGE STATE OF to work. So, you need to check all 6 variables for TRUE Each time you click the hotspot, since you might click them in a different order... I just say CHANGE STATE OF Next button to Normal on the condition that variable 1 2 3 4 5 and 6 are True. Before that you need to set the variable to true right beforehand. You need to do this on each button/hotspot.
You might want to try rearranging the order of your triggers. If you check for True, THEN set variable, then it will not work.
Hi
Thank you all for replying, however after spending even more time on it I still can't get it to work.
I've added your suggestion of variables references Brian, and it turns out that the hotspots weren't changing to True once they were clicked for some reason. So I changed the trigger to 'mouse hovered over' instead of 'user clicks', and now they do change as expected.
I've also added your trigger suggestions Mary Ann, and re-ordered all the triggers to what I think is right, but I like I say it's still not working.
The button disables as expected but won't change back to normal. I think it might have something to do with the 'Change State Back to Normal' trigger, as I'm not sure what to set the 'When' to?
I've attached the .story file.
Thanks again for the support.
Stephanie
Hi Stephanie
I have updated your file using offstage objects to control the mouseovers and the next button.
Also your triggers were set to when timeline starts on the 'next button' .
See if the attached works for you
This discussion is closed. You can start a new discussion or contact Articulate Support.