Storyline 360: Setting Storyline Options
Here’s how to change your Storyline settings, including auto-recovery, spell-checking, and more.
- Opening the Storyline Options Window
- Setting General Options
- Setting Spelling Options
- Setting Dictionary Options
- Managing Custom Dictionaries
- Setting AutoCorrect Options
- Changing the Interface Language
- Turning Optional Features On and Off
Opening the Storyline Options Window
Go to the File tab on the Storyline ribbon and click Storyline Options. The following window will appear where you can adjust the options described below.
Setting General Options
Use the General tab of the Storyline Options window to adjust these settings:
Save AutoRecovery information every ___ minutes |
Mark this box to recover your work if you experience a power outage or the app shuts down unexpectedly. Storyline will automatically save a copy of your project at the specified interval (after you’ve saved it at least once). The default interval is every 10 minutes, but you can enter any whole number between 1 and 120. If Storyline closes unexpectedly, you’ll be prompted to recover your project the next time you open it. |
Hardware graphics acceleration is enabled by default to give authors a better experience when creating 360° image interactions. If you’d prefer to turn off hardware graphics acceleration, check this box. |
|
Reset "Don't show again” prompts |
For some actions, such as deleting audio, Storyline displays a confirmation prompt with an option to "Don’t show again" or "Don’t ask again." If you mark the box, Storyline will no longer display the confirmation prompt when you perform the same action later. To turn all the confirmation prompts back on, click Reset "Don’t show again” prompts. |
Setting Spelling Options
On the General tab, click Spelling Options to set your preferences for the spell checker and dictionary. Keep in mind that the preferences you set here will also impact other Articulate products that are installed on the same computer.
Hide spelling errors |
This hides the wavy red lines that normally appear under misspelled words. (When you run a spell check, the misspelled words will still be caught.) If you choose to make the wavy red lines visible, you can right-click any misspelled word for a list of suggested spellings. |
Ignore words in UPPERCASE |
Words with all capital letters won’t get spell checked. |
Ignore words with numbers |
Words that contain numbers won’t get spell checked. |
Ignore Internet and file addresses |
Website URLs, email addresses, and file paths won’t get spell checked. |
Ignore capitalized words |
Words with initial capital letters won’t get spell checked. |
Ignore words with mixed case |
Words that contain both uppercase and lowercase letters won’t get spell checked. |
Ignore HTML markups |
Words with HTML tags won’t get spell checked. |
Allow accented words |
Words with accented letters won’t get spell checked. |
Report doubled words |
Instances of the same word appearing one after the other will get flagged during spell check. |
Suggest split words |
If a misspelled word appears to be two separate words, Storyline will suggest splitting them apart. |
Phonetic suggestions |
If a misspelled word resembles the phonetic spelling of an actual word, Storyline will provide suggested corrections. |
Typographical suggestions |
During spell check, Storyline will provide suggested corrections that are typographically similar to the misspelled word. For example, if you type "potatoe" the words "potatoes" and "potato" will be suggested. |
Case sensitive |
This enables Storyline to distinguish words based on the case patterns of their letters. |
Auto correct |
This enables Storyline to dynamically correct misspellings as you type. If you mark this box, you can also click the corresponding Options button to customize your autocorrect dictionary. See the section below on Setting AutoCorrect Options for details. |
If you change your mind about your choices on this window, you can switch back to the default settings by clicking Restore Defaults at the bottom of the window.
Setting Dictionary Options
Use the dictionary options at the bottom of the Spelling Options window to switch the spell checker to a different language and to manage your custom dictionaries.
- Use the Main Dictionary Language drop-down to choose the dictionary you want to use for spell checking.
- Click Custom Dictionaries to add, modify, or remove a custom dictionary. Custom dictionaries supplement your main dictionary with additional words that you don’t want Storyline to flag during spell checks, such as names, industry-specific words, technical terms, and alternate spellings.
Managing Custom Dictionaries
When you click Custom Dictionaries on the Spelling Options window (see above), the following window appears.
Modify a dictionary |
Select a dictionary from the list and click Modify. A window appears where you can add or remove words for your custom dictionary. To add a word, type it in the Word field and click Add. To remove a word, select it and click Delete. Click OK when you’re done. |
Change the default dictionary |
To set a custom dictionary as the default, choose a dictionary from the list and click Change Default. |
Create a new dictionary |
Click New. Type a name for your new dictionary and click Save. The new dictionary will appear in your dictionary list, and you can add words to it as needed. |
Import a custom dictionary |
Import a custom dictionary you receive from someone else. Click Add, browse to the *.dic file, and click Open. The dictionary will appear in your dictionary list, and you can modify it as needed. |
Remove a dictionary |
Select the dictionary you want to remove and click Remove. This doesn’t remove the *.dic file from your hard drive, but it does remove it from your dictionary list in Storyline and other Articulate programs. |
Setting AutoCorrect Options
The autocorrect options let you choose which misspellings Storyline will automatically fix for you. To edit your autocorrect options, open the Storyline Options window, select the General tab, and then click AutoCorrect Options.
When the AutoCorrect window appears, you can turn the entire feature on or off by marking/unmarking the Replace text as you type box. When it’s enabled, Storyline will replace misspelled words from the left-hand column with the corresponding text from the right-hand column as you type. Here’s how to customize it:
To add a word to the list |
Type the word you want to add in the Replace field. Type the word you want to replace it with in the With field. Then click Add. |
To remove a word from the list |
Select the word you want to remove and click Delete. |
To change the replacement text |
Select a word in the left-hand column, then type the text you want Storyline to replace it with in the With field. Then click Replace. |
Click OK when you’re done managing your AutoCorrect options.
Changing the Interface Language
You can localize the Storyline interface in English, French, German, or Spanish. The language setting is located in the Articulate 360 desktop app that runs in your computer’s system tray (next to the clock). See this article for details.
Turning Optional Features On and Off
When Storyline 360 has optional features, you can use the Features tab on the left side of the Storyline Options window to turn them on and off.
Currently, you can switch between the enhanced Word translation workflow and the legacy Word translation workflow. Either check or uncheck the box to Use the new, faster Word translation workflow and then click OK. It’s that easy!