Hi All, Sorry this is probably one of those lack of knowledge of the product questions, but I have created a simulation that if an incorrect response has been entered into a field and even after the Try Again layer has been displayed, and the correct response entered the second time the simulation states the answer is incorrect. We are running the simulations without the TOC so our participants will become stuck at this point. Is there a shortcut key or something that the participant can use to move to the next screen bypassing this 'glitch'. Cheers David
I'm happy to help! It sounds like you have a Test Mode software simulation, but I'm not sure I fully understand what you've created so far. Would you mind providing a .story file or a screen recording so that we can get a better understanding of what you're looking to achieve?
Yes I have created a Try It simulation and for some reason just on one screen the trigger I created for the Try Again layer does not clear the initial text entry when that text entry is incorrect. I can manually clear it first by pressing the delete key then re-enter the correct value and it will work, but if I don't clear the entry although the entry does not show it is clearly somewhere in the field as it will keep giving me the Try Again layer. At this point in time I don't think it is something to worry about.
However I do have another lack of knowledge issue. Is it possible to embed a simulation in a Rise course but have the first screen you see on the simulation a picture or text or something other than this big black picture image. i.e. is it possible to add an image on the first page.
David Reddaway | FPIM Training Specialist | NZ Health Partnerships Hono Oranga Aotearoa
Phone: +64 21 203 4634 Email: david.reddaway@nzhp.health.nz Website: www.nzhealthpartnerships.co.nz Postal: PO Box 11-410 Ellerslie, Auckland 1542 Physical: Floor 2, Building 7, Central Park, 666 Great South Road, Penrose, Auckland 1061
[cid:image001.jpg@01D79363.4FB2C400]
customer@heart I OneTeam I Integrity I Results I Ambition
Statement of confidentiality: This e-mail message and any accompanying attachments may contain information that is IN-CONFIDENCE and subject to legal privilege. If you are not the intended recipient, do not read, use, disseminate, distribute or copy this message or attachments. If you have received this message in error, please notify the sender immediately and delete this message.
Please consider the environment before printing this e-mail. 1 ream of paper = 6% of a tree and 5.4kg CO2 in the atmosphere. 3 sheets of A4 paper = 1 litre of water.
(...) the trigger I created for the Try Again layer does not clear the initial text entry when that text entry is incorrect (...)
Which trigger did you add for the Try Again layer? I usually recommend adding Set TextEntry to value (blank) when the user clicks Try Again if that's not the one you're using.
Just make sure that trigger happens before the one that hides the layer, so it works in the correct order.
Is it possible to embed a simulation in a Rise course but have the first screen you see on the simulation a picture or text or something other than this big black picture image (...)
Do you have audio or video on the first slide of your Storyline project? This article will explain why you see this behavior on modern browsers.
One option to avoid the Play button is to insert a blank slide as your first slide and add a trigger to jump to the next slide when the timeline starts.
Keep in mind that this will also be browser-dependent, and while it might show the slide without the Play button, it might still require the user to click on the screen to hear the audio.
I also wanted to add a quick note: it looks like your signature with contact information came through when you replied via email. You can remove it by clicking ‘Edit’ below your response. Here’s a quick Peek 360 video if you need help.
3 Replies
Hello David!
I'm happy to help! It sounds like you have a Test Mode software simulation, but I'm not sure I fully understand what you've created so far. Would you mind providing a .story file or a screen recording so that we can get a better understanding of what you're looking to achieve?
Hi Lauren,
Yes I have created a Try It simulation and for some reason just on one screen the trigger I created for the Try Again layer does not clear the initial text entry when that text entry is incorrect. I can manually clear it first by pressing the delete key then re-enter the correct value and it will work, but if I don't clear the entry although the entry does not show it is clearly somewhere in the field as it will keep giving me the Try Again layer. At this point in time I don't think it is something to worry about.
However I do have another lack of knowledge issue. Is it possible to embed a simulation in a Rise course but have the first screen you see on the simulation a picture or text or something other than this big black picture image. i.e. is it possible to add an image on the first page.
[cid:image004.png@01D79364.6118B1E0]
Regards David
David Reddaway | FPIM Training Specialist | NZ Health Partnerships Hono Oranga Aotearoa
Phone: +64 21 203 4634 Email: david.reddaway@nzhp.health.nz Website: www.nzhealthpartnerships.co.nz
Postal: PO Box 11-410 Ellerslie, Auckland 1542 Physical: Floor 2, Building 7, Central Park, 666 Great South Road, Penrose, Auckland 1061
[cid:image001.jpg@01D79363.4FB2C400]
customer@heart I OneTeam I Integrity I Results I Ambition
Statement of confidentiality: This e-mail message and any accompanying attachments may contain information that is IN-CONFIDENCE and subject to legal privilege. If you are not the intended recipient, do not read, use, disseminate, distribute or copy this message or attachments. If you have received this message in error, please notify the sender immediately and delete this message.
Please consider the environment before printing this e-mail. 1 ream of paper = 6% of a tree and 5.4kg CO2 in the atmosphere. 3 sheets of A4 paper = 1 litre of water.
Hi, David.
Which trigger did you add for the Try Again layer? I usually recommend adding Set TextEntry to value (blank) when the user clicks Try Again if that's not the one you're using.
Just make sure that trigger happens before the one that hides the layer, so it works in the correct order.
Do you have audio or video on the first slide of your Storyline project? This article will explain why you see this behavior on modern browsers.
One option to avoid the Play button is to insert a blank slide as your first slide and add a trigger to jump to the next slide when the timeline starts.
Keep in mind that this will also be browser-dependent, and while it might show the slide without the Play button, it might still require the user to click on the screen to hear the audio.
I also wanted to add a quick note: it looks like your signature with contact information came through when you replied via email. You can remove it by clicking ‘Edit’ below your response. Here’s a quick Peek 360 video if you need help.