This is incredibly helpful, Wendy! Thank you so much for sharing that with the community. I'm bookmarking this thread now because I know I'll need to refer back to it often! :)
Hi Wendy, I'm having all sorts of trouble with this for some reason. Firstly it wouldn't allow me to select 'submit' button when setting the correct/incorrect triggers. I've copied the trigger off a template I've downloaded in the hope that this is a workaround. However I complete the questions with the correct answers and I'm being told the questions are incomplete? Any ideas why? I've included screen shots. TIA
Thank you so much. Such a simple correction that is easily overlooked. Works fine now. Would you mind helping me with my next issue also please? The user is to 'check' each box that applies to them therefore there isn't a correct answer. I'd like the 'complete' layer to appear when any number of inputs have been applied and the 'incomplete' to appear should the user try to submit without checking any. Story file attached. Sorry for all of the questions this is my first question storyline file. TIA
I have said it before and I'll say it again - you're a legend!
I have used this in a number of courses now and it's perfect, however I have one particular question where the student needs to provide 3 kinds of documents. I am wondering if there is a way to prevent them from entering the same document 3 times and still coming up for a correct answer?
There are 10 different documents they could enter, however if they write, say, "communication plan" in TextEntry1, and then write "communication plan" in TE2 and 3, I want Storyline to pick up on this and mark it as incorrect.
If I understand correctly, this technique is a "all or nothing" proposition. If I have 5 text entry fields on one slide, the user has to enter all 5 correct answers to get points. What I would like to do, is to have 5 text entry fields and the user gets 1 point for each correct answer. If he gets 2 answers right, he gets 2 points. I can't figure out how to do this. Is this possible?
I cannot access the screencast for some reason. Is there another link I can go to that will give me a step by step procedure to create this type of interactive?
Hello, wonderful people! I have a situation using multiple text entry fields on one slide that I hoped you could take a look at - Storyline file attached. From over 60 values the learner first selects his/her top 15 then types in the "top 5".
I need those 5 that they type in to be communicated to the LMS, but that isn't happening. And, it doesn't seem like it's triggering a completion. I'm honestly not sure if I have it set up correctly. Any suggestions/input/feedback is greatly appreciated!
66 Replies
This is incredibly helpful, Wendy! Thank you so much for sharing that with the community. I'm bookmarking this thread now because I know I'll need to refer back to it often! :)
Thanks Alyssa - I've updated the post to include Jeanette's original screencast so it makes more sense for newcomers ;-)
Yeah it' perfect !! Thanks Alyssa ; it's very kind of you !!!!!
i don't want to abuse... but could you publish the "download's project" ???
Thanks !
Hi Anthony! I think you are referring to your original thread over here. I'm so glad it worked for you! Many thanks to Wendy for creating this demo!
And I'm not sure I completely understand your question. Are you having trouble publishing the file I attached in the other thread?
Glad that helped you Libby :-)
Hi Wendy, I'm having all sorts of trouble with this for some reason. Firstly it wouldn't allow me to select 'submit' button when setting the correct/incorrect triggers. I've copied the trigger off a template I've downloaded in the hope that this is a workaround. However I complete the questions with the correct answers and I'm being told the questions are incomplete? Any ideas why? I've included screen shots. TIA
Happy to take a look if you upload the story file or the slide Farai.
Things to check
Hi Wendy, thank you for your response. I've got it to work on one slide but this one doesn't want to work (attached). Thanks
Hi Farai
as noted above it was an issue with your conditions
The 'incorrect' button is triggered when hands is not equal to hands OR back is not equal to back - you had AND in the conditions
Thank you so much. Such a simple correction that is easily overlooked. Works fine now. Would you mind helping me with my next issue also please? The user is to 'check' each box that applies to them therefore there isn't a correct answer. I'd like the 'complete' layer to appear when any number of inputs have been applied and the 'incomplete' to appear should the user try to submit without checking any. Story file attached. Sorry for all of the questions this is my first question storyline file. TIA
Hi Farai
you haven't set this up as a Pick One slide it's just a content slide.
Order of triggers is very important
Hope this is what you were after
Thank you ever so much Wendy. You are a lifesaver. I have so much to learn.
My pleasure Farai - glad that will help you. Good luck with your project :-)
This post was removed by the author
Hi Wendy!
I have said it before and I'll say it again - you're a legend!
I have used this in a number of courses now and it's perfect, however I have one particular question where the student needs to provide 3 kinds of documents. I am wondering if there is a way to prevent them from entering the same document 3 times and still coming up for a correct answer?
There are 10 different documents they could enter, however if they write, say, "communication plan" in TextEntry1, and then write "communication plan" in TE2 and 3, I want Storyline to pick up on this and mark it as incorrect.
Hope that makes sense?
Thanks!
Flo :)
Hi Flo
thank you :-) - share your slide and let me take a look how it's setup and I'll see what we can do.
Thanks Wendy! Is there any way I can send you the snips of the slide and set up privately?
Hey Florence
If you click my profile picture you can send me a message direct to my email - remember I'm not Articulate Staff if that makes a difference.
Hi Wendy,
If I understand correctly, this technique is a "all or nothing" proposition. If I have 5 text entry fields on one slide, the user has to enter all 5 correct answers to get points. What I would like to do, is to have 5 text entry fields and the user gets 1 point for each correct answer. If he gets 2 answers right, he gets 2 points. I can't figure out how to do this. Is this possible?
Hi JC
I know that SL can do partial scoring for specific quiz types - but this demo is a mish mash using a Freeform Pick One to manipulate TE so I don't think it's possible out of the box.
There may be a way set up a custom variable eg 'UserScore' and JS to report that to the LMS.
Hi Wendy !
I cannot access the screencast for some reason. Is there another link I can go to that will give me a step by step procedure to create this type of interactive?
Thanks in advance!
Hi Lubna
that screencast was done by someone else and I was just linking into it. I notice also that it cannot be accessed.
If you try using the demo file and it's not working...try uploading your story file and someone can assist you.
Hey folks!
Here's the original video from Jeanette Brooks, in case you'd like to take a look:
Hello, wonderful people! I have a situation using multiple text entry fields on one slide that I hoped you could take a look at - Storyline file attached. From over 60 values the learner first selects his/her top 15 then types in the "top 5".
I need those 5 that they type in to be communicated to the LMS, but that isn't happening. And, it doesn't seem like it's triggering a completion. I'm honestly not sure if I have it set up correctly. Any suggestions/input/feedback is greatly appreciated!
Thank you, Wendy. I have a similar problem and will take a look. Thanks
This discussion is closed. You can start a new discussion or contact Articulate Support.